Some more re-built, pistons in, timing chain, oil pump and timing gear in the cylinder head fitted. The engine needs taking off the stand and onto blocks before I will fit the head, otherwise it is too heavy to take it off the engine stand without a crane, which would not fit in the room. So I will make a trolley and lumps of timber to lower the engine from the stand in stages. I want to get the clutch plate and starter fitted to allow it to be primed with oil through the system, before it is mothballed again.
Pistons & chain gear installed
Front cover on
Cylinder head, Cam gear (Note! cams are on the wrong sides in this picture)