(Morrigan, as a synonym of Morgan of Arthurian legend)

Monday, 15 February 2010

Engine rebuild - last of the machining

Well I took the crank, con rods, pistons, fly wheel and clutch cover over to the engine builders in Edinburgh, where they steam cleaned the pistons and con rods and balanced the whole system. Its surprising the amount of difference between items such as the pistons, even for stock parts.

Cleaned up cam shaft

The crank has been wrapped in cling film to protect it from dust and damp, I just need to get the head shims measured up and the head finished. then the whole thing can go back together.

Crank after balancing and cleaning

Balanced con rods - both ends checked

New gapped piston rings - steam cleaned pistons

All Pistons balanced

Last bits of engine cleaned and painted

Cleaned and lacquered gearbox adaptor

2 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. Hi John,

    I've sent you an email so you have my contact details.

    David

    ReplyDelete