Well this is the first attempt at building a set of guiding geometry for the overall size and style of the car.
With so little information to go from ive had to use scans from the "Illustrated directory of classic cars" which has some water colours that can be used to get the overall ratios. The front end of the pictures is from a different build, so this area will take a fair bit of work to get right.
Having the digitised engine and gearbox is a major help with checking the shape of the bonnet. I will be replacing the stock alternator with a DENSO unit which will knock 50mm off the width of the installation.
The throttles will have reasonable space, what with them being further back in the vehicle. And there should be a fair bit of space for a good sized radiator, so cooling should not be a problem.
The manikins have been sized to me, so there should be reasonable leg room when i'm done, I dont think i would fit in an original terribly well.
I've been searching through numerous 1930's and 40's 2 seater's for a basis of design for this project, in the considered and rejected list we have:
These have not quite had the style that I'm after. One car that nearly fits my (current) tastes is the 1934-Lagonda-M45-Tourer but the current winner for a basis of design is the 1933-Squire-Vanden-Plas-Sports-Tourer. This is a stunning vehicle, only 3 were made by the builder Adrian Squire with a 2 seater body, with a remaining 4 produced with 4 seats. The high cost proved un-viable (~£1,095 or £278,773 in 2008 money) and the company went out of business, Adrian Squire went on to join Lagonda before being killed by a bombing raid in 1940.
1934 Squire Vanden Plas Sport Tourer
Due to my use of the XJ40 running gear it wont be an exact replica, but I aim to follow the styling closely. The rear suspension components will be well hidden. The original use of huge 15" brake drums means that front independent suspension will not be overtly out of place.
One final thought is that it may be possible to have hybrid pressed steel and wire wheels, this would allow the use of the standard hubs, as I've so far been struggling to find wire hubs for the XJ40. This would mimic the effect of wire wheels with large brake drums.
In other news i'm in the process of purchasing the parts for completing the engine, some are very scarce now so the full cost is going to be in the region of £650-700. This blows my current funds for a while, and will require an additional means of financing the project. The current plan is for selling custom aluminium and brass castings along with glass work.