Storage shed now has the de-humidifier running as there is no damp-course, in an attempt to keep the rust a bay, as the block is growing small crystals on it, which is not good. As soon as the block is stripped I'll get it cleaned, honed and painted in short order.
I can wait until the engine is done before tackling the suspension as replacement parts for the engine are few and expensive, so it needs doing asap.
Gearbox, hubs etc.
Getting the engine up on the stand was tricky, as my boss has my engine hoist at the moment, so added block at each end until it was high enough to attach the stand and tip it upright. Which was a little nerve wracking.
Will try the stove at full burn tomorrow evening and see how the chimney behaves and the heat it will give out.
Engine up on stand & Wood burning stove
Have removed the pistons and dosed them with silicone spray, they can live in the storage shed without rusting hopefully or getting dusty.
Engine devoid of pistons
...And place in an oven at 200'C...